[Logic] Move to Spot Frequency with Orion

[Paul Frantz]

Dennis,

I appreciate the efforts. Unfortunately after downloading the latest 
update I still have the problem. It is a little different now. Whenever 
I use the set rig button the vfo A is set to the spot frequency but the 
transmitter and main receiver are switched to vfo B. The sub receiver is 
turned off. If I use the set rig button on another spot the transmit may 
turn off while the main receiver remains on vfo B. I can't find a 
pattern to whether the transmit will be turned on or off, the main 
receiver is always on but on vfo B.

I am using a Compaq with a 2.4 ghz Celeron running XP home edition. 
Ain't computers fun?

It is no big deal with me since I rarely use the function, but I'm sure 
there are other Orion owners out there who do.

Tnx es 73,

Paul W5PF

pdainc at hosenose.com wrote:

>Hi--
>
>Bob, W2WG spent considerable time on the phone with me today.  
>With his help, the Orion is fixed.
>
>All we did was add a tiny delay between netting freq & mode. We think 
>the problem occurs on very fast computers.
>
>Pse download the latest update.
>
>Tnx & 73,
>
>Dennis WN4AZY
>
>Date sent:      	Sat, 05 Feb 2005 17:04:19 -0600
>From:           	Paul Frantz <w5pf at houston.rr.com>
>To:             	"LOGic is open to all radio amateurs for discussion of LOGic logging  program." <logic at mailman.qth.net>
>Subject:        	Re: [Logic] Move to Spot Frequency with Orion
>Send reply to:  	"LOGic is open to all radio amateurs for discussion of LOGic logging  program." <logic at mailman.qth.net>
>	program. " <logic.mailman.qth.net>
>	<mailto:logic-request at mailman.qth.net?subject=unsubscribe>
>	<mailto:logic-request at mailman.qth.net?subject=subscribe>
>
>  
>
>>Bob,
>>
>>I also use Logic with the Orion. I rarely use Logic to set the rig to
>>a frequency, so I had not noticed the problem you mentioned. I have
>>played with it for a few minutes and find a similar problem. VFO A is
>>set correctly and the main receiver is set to VFO A. The transmit is
>>sometimes set to VFO A and sometimes to VFO B. VFO B stays on whatever
>>frequency it was previously. Occasionally the transmit is turned off.
>>
>>Hope this helps.
>>
>>Paul W5PF
>>
>>_______________________________________________
>>LOGic mailing list
>>LOGic at mailman.qth.net
>>http://mailman.qth.net/mailman/listinfo/logic
>>
>>    
>>
>
>================================
>WHEN REPLYING, PLEASE INCLUDE A COPY OF
>THIS MESSAGE IN YOUR REPLY.  THANK YOU.
>
>Personal Database Applications
>1323 Center Dr.
>Auburn, GA  30011-3318 USA
>
>770-307-1511 
>770-307-1496 tech support
>
>Check out our web page! Tell others about it!  Thanks.
>
>          http://www.hosenose.com/
>
>_______________________________________________
>LOGic mailing list
>LOGic at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/logic
>
>
>  
>