[Logic] Move to Spot Frequency with Orion

[pdainc at hosenose.com]

Hi--

Bob, W2WG spent considerable time on the phone with me today.  
With his help, the Orion is fixed.

All we did was add a tiny delay between netting freq & mode. We think 
the problem occurs on very fast computers.

Pse download the latest update.

Tnx & 73,

Dennis WN4AZY

Date sent:      	Sat, 05 Feb 2005 17:04:19 -0600
From:           	Paul Frantz <w5pf at houston.rr.com>
To:             	"LOGic is open to all radio amateurs for discussion of LOGic logging  program." <logic at mailman.qth.net>
Subject:        	Re: [Logic] Move to Spot Frequency with Orion
Send reply to:  	"LOGic is open to all radio amateurs for discussion of LOGic logging  program." <logic at mailman.qth.net>
	program. " <logic.mailman.qth.net>
	<mailto:logic-request at mailman.qth.net?subject=unsubscribe>
	<mailto:logic-request at mailman.qth.net?subject=subscribe>

> Bob,
> 
> I also use Logic with the Orion. I rarely use Logic to set the rig to
> a frequency, so I had not noticed the problem you mentioned. I have
> played with it for a few minutes and find a similar problem. VFO A is
> set correctly and the main receiver is set to VFO A. The transmit is
> sometimes set to VFO A and sometimes to VFO B. VFO B stays on whatever
> frequency it was previously. Occasionally the transmit is turned off.
> 
> Hope this helps.
> 
> Paul W5PF
> 
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
> 

================================
WHEN REPLYING, PLEASE INCLUDE A COPY OF
THIS MESSAGE IN YOUR REPLY.  THANK YOU.

Personal Database Applications
1323 Center Dr.
Auburn, GA  30011-3318 USA

770-307-1511 
770-307-1496 tech support

Check out our web page! Tell others about it!  Thanks.

          http://www.hosenose.com/