[Logic] Re: LOGIC SERIAL PORT ERROR

[k0dan]

With all this said, I still cannot explain why I am also getting ERROR 1426
"OLE ERROR CODE 0X80070002: THE SYSTEM CANNOT FIND THE FILE SPECIFIED" HAS
OCCURED IN PROGRAM LOGICAPP.AFTER_INIT, LINE 20


----- Original Message ----- 
From: "k0dan" <k0dan at comcast.net>
To: "LOGic is open to all radio amateurs for discussion of LOGic logging
program." <logic at mailman.qth.net>; <nx4w at cox.net>; <w5pf at ev1.net>;
<rlcarroll at patmedia.net>
Sent: Sunday, September 12, 2004 18:45
Subject: LOGIC SERIAL PORT ERROR


> Well things are looking mighty dim. This appears to be a hardware problem
> with the rig...altho I still cannot fathom why it has suddenly cropped up.
>
> Swapped the serial cable, no joy. Tested the PC COM port by hooking to a
> modem and it appeared to work OK Brought the laptop into the shack,
> installed LOGIC6, and cabled it to the FT1000MP....no joy! CRAP! It looks
> like the CAT (COM) port on the Yaesu is out!
>
> There is no reason for this (rig has been powered off, no antennas) and
only
> since I installed LOGIC7 is this problem evident. A new corrolary of
> Murphy's Law, I guess.
>
> I don't want to rush into sending the rig to Yaesu....does anyone have any
> info on replair/replacement of the interal serial interface to FT-1000MP?
>
> Until I can prove the serial interface in the rig is working, I cannot
point
> my finger at Dennis or LOGIC.
>
> Has anyone successfully repaired the FT1000MP CAT interface?
>
> 73
>
> Dan
> K0DAN
>
> ----- Original Message ----- 
> From: "k0dan" <k0dan at comcast.net>
> To: "Lloyd S. Smith" <nx4w at cox.net>
> Cc: "LOGic is open to all radio amateurs for discussion of LOGic logging
> program." <logic at mailman.qth.net>
> Sent: Saturday, September 11, 2004 22:07
> Subject: [Logic] Re: Serial Port
>
>
> Thanks Lloyd...At this point I have about 5-6 new variables I need to
> explore. Someone came up with the idea of using a non-LOGIC program to
talk
> to the rig...this is a good idea and I believe I have TRXMGR floating
around
> somewhere and need to try that. If the FT1000MP serial port is fried I
will
> be ticked, but that will eliminate all the other grasping at straws.
>
> Will be kind of tied up the next few days but will post my findings as I
> have time to address them.
>
> Thanks and 73,
> Dan
> k0DAN
>   ----- Original Message ----- 
>   From: Lloyd S. Smith
>   To: k0dan at comcast.net
>   Sent: Saturday, September 11, 2004 14:52
>   Subject: Serial Port
>
>
>   Hi Dan:
>
>   I think I sent my first message to the wrong person.  I believe you are
> the one having the problem.  Sorry about that.
>
>   Whenever I have a problem with any program the first place I look is the
>   registry.  Enter a search command for the word "logic" and delete every
>   entry that looks like it might have something to do with your problem. I
> fix
>   9 out of 10 problems this way.  I upgraded from 6 to 7 and have no
problem
>   interfacing my FT1000MP.  You might also try searching for "com1"
>
>   73'  Lloyd
>   NX4W
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>