[Logic] SERIAL PORT ERROR?

[Dave]

No, I only have Logic7 installed now; but 2 instances of it.

Jacques
k5dv at arrl.net


-----Original Message-----
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
On Behalf Of k0dan
Sent: Thursday, September 09, 2004 10:49 PM
To: Mel Martin; LOGic is open to all radio amateurs for discussion of LOGic
logging program.; k5dv at arrl.net
Subject: Re: [Logic] SERIAL PORT ERROR?

Jacques...

Do you also have LOGIC 6 installed? And do you have the same problem with
LOGIC 6?

I can't swear this is the case, but it seems that serial communications to
the rig were killed after LOGIC 7 was installed. Prior to having two LOGIC
versions installed, LOGIC 6 was talking to the rig fine. Now, neither
version does.

73
Dan
K0DAN
----- Original Message ----- 
From: "Mel Martin" <ve2dc at rac.ca>
To: <k5dv at arrl.net>; "LOGic is open to all radio amateurs for discussion of
LOGic logging program." <logic at mailman.qth.net>
Sent: Wednesday, September 08, 2004 11:09
Subject: Re: [Logic] SERIAL PORT ERROR?


> > Maybe it's time to get Dennis involved.
> I think he is still on vacation...
>
> ----- Original Message -----
> From: "Dave" <k5dv at arrl.net>
> To: "'LOGic is open to all radio amateurs for discussion of LOGic logging
> program.'" <logic at mailman.qth.net>
> Cc: "'Personal Database Applications'" <dennis at hosenose.com>
> Sent: Wednesday, September 08, 2004 09:21
> Subject: RE: [Logic] SERIAL PORT ERROR?
>
>
> Dan,
>
> I have been having the same problem here using Logic7. I have tried
changing
> ports and the timing to poll the rig. So far nothing has worked to resolve
> the problem. Maybe it's time to get Dennis involved.
>
> Jacques
> k5dv at arrl.net
>
>
> -----Original Message-----
> From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
> On Behalf Of k0dan
> Sent: Tuesday, September 07, 2004 10:44 PM
> To: logic at mailman.qth.net
> Subject: [Logic] SERIAL PORT ERROR?
>
> Hi folks...
>
> Been running LOGic6 for several years, including rig interface. All OK.
>
> Recently purchased LOGic7, and am running both 6 and 7 from different
> directories during the transition debugging.
>
> Suddenly, the rig interface no longer works. The error I get is a pop-up
> window stating
> A TIMEOUT OCCURED WHILE ATTEMPTING TO COMMUNICATE WITH A RIG. MAKE SURE
RIG
> IS TURNED ON AND CHECK SETUP PARAMETERS. POLLING DISABLED. 4 CHARACETRS IN
> BUFFER. F0-40-02-00.
>
> The rig is powered up, cable is OK, and setup parameters are unchanged. In
> fact nothing is changed.
>
> The error pops up if I start LOGic6 or LOGic7. I am speaking of a problem
> when running only ONE of the LOGic programs; of course both simultaneously
> will not share the COM port.
>
> I believe this propblem only cropped up since I installed LOGic7 in a new
> directory.
>
> Any ideas what is going on here?
>
> Thanks and 73
> Dan
> K0DAN
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> LOGic at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>

_______________________________________________
LOGic mailing list
LOGic at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/logic