[Logic] LOGic 7 / Hamscope & PTT

[Mel]

The whole point of keying "through" Logic is to allow the sharing of the PTT
and CW keying lines by the 2 programs.

> -----Original Message-----
> From: logic-admin@mailman.qth.net 
> [mailto:logic-admin@mailman.qth.net] On Behalf Of Greg Fischer
> Sent: March 14, 2004 22:28
> To: logic@mailman.qth.net
> Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
> 
> 
> Hi all.
> 
> Just thought I would chime in here.  Mind you that no expert 
> resides at this qth...hihi.
> 
> If you are using the terminal withing Logic to read hamscope 
> data, and you are going to transmit using macros from within 
> Logic, then you should set the PTT from within Logic, I think 
> using the RTS line.  Do not set a COM port from within 
> Hamscope too.  If you do and you use the same COM port, there 
> will be a conflict as the port is already "open" and in use by Logic.
> 
> If you intend to use the macros and windows provided for 
> within Hamscope, then set your PTT from there and not in Logic.
> 
> I often use hamscope for casual digi modes and use it's many 
> available macros and just let it log the entries into Logic.  
> But then I am using two monitors, one with Hamscope running 
> and the other with Logic running.
> 
> If this doesn't help anyone...sorry for taking up the bandwidth.
> 
> 73
> Greg
> AB7R
> 
>