[Logic] LOGic 7 / Hamscope & PTT

Sun, 14 Mar 2004 22:30:43 -0500

Works fine here... But I have noticed that when setting up the keying, it's
necessary to close the Keyer window and re-open it for it to work.

I have it set up for PTT and CW on the same port... I use DTR for PTT and
RTS for CW keying... Works FB... It's set up the same as my Writelog.

> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Brad - N8GLS
> Sent: March 14, 2004 21:05
> To: [email protected]
> Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
> 
> 
> Your right Mel,
> 
> It seems to me that the COM port setting in Hamscope would be 
> None, and the PTT control would be set to Logger (but I'm 
> only guessing).  After messing around I did discover that I 
> didn't have the PTT set to anything in LOGic, and that brings 
> my next problem.  While trying to get LOGic to key the 
> rigblaster, when I attempt to set it (PTT to serial port) to 
> com 1, I get the following error in LOGic (without hamscope launched);
> 
> ERROR 1925 "Unknown member KEYOBJ has occurred" in program 
> LOGICAPP.OPEN_VOICE_PTT_PORT, Line 54
> 
> After I click Continue, this error follows:
> 
> ERROR 1734 "Property KEYOBJ is not found" in program 
> LOGICAPP.OPEN_VOICE_PTT_PORT, Line 55
> 
> I Continue again, ignoring this as well and for giggles I 
> click on the "test" button for PTT keying, and it keys the 
> rigblaster, but Hamscope never keys.  I continued changing 
> the parameters every which way to Sunday in both LOGic and 
> Hamscope and only got Hamscope to key when it directly keys PTT.
> 
> Ever seen the errors I'm getting when trying to set serial 
> PTT keying in LOGic ?
> 
> Brad
> 
> 
> -----Original Message-----
> From: [email protected] 
> [mailto:[email protected]]On
> Behalf Of Mel
> Sent: Saturday, 13 March, 2004 3:13 PM
> To: [email protected]
> Cc: [email protected]
> Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
> 
> 
> OK Brad... That works... Sort of!!!
> 
> But the way I see it you are NOT using Logic to do the PTT....
> 
> What I notice when set up this way is if I open the CQ keyer 
> form, Hamscope won't work... Ie Hamscope only works if the 
> port is NOT open by Logic which seems to indicate to me that 
> all you are doing is keying the PTT directly from Hamscope.
> 
> Dennis, could you clarify how this is supposed to work 
> please... It seems to me that the PTT/CW keying link from 
> Hamscope to Logic 7 is not working.
> 
> > -----Original Message-----
> > From: [email protected] 
> [mailto:[email protected]] 
> > On Behalf Of Brad - N8GLS
> > Sent: March 13, 2004 14:25
> > To: [email protected]
> > Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
> >
> >
> > Hi Mel,
> >
> > Here is the text version for the benefit of others on the reflector.
> >
> > In Hamscope (I'm running v1.54) General Setup:
> >
> > PTT Control Setup
> >
> > COM Port - COM 1 (port for my RIGblaster, yours would be 
> whatever port 
> > you've assigned for your particular interface) PTT Using - 
> Both (yours 
> > may be RTS or DTR, whatever you setup for the
> > interface)
> > PTT to Logger - Check this if LOGic is the controller
> > Hard Key CW Using - Mine is set to none for now, don't do 
> much CW but 
> > that will change very soon Unused Pins High - Mine is checked
> >
> > Rig Control Setup
> >
> > COM Port - Port your rig is assigned to, mine is COM 4
> > Radio - LOGic 6
> > Rig Baud - 9600
> >
> > Log Program is set to LOGic 6
> >
> > That's really all there is.  Knowing you (your not a novice) you 
> > probably tried to set Hamscope to work with your rig (Icoms 
> I think) 
> > as a standalone application (i.e., not linked to LOGic).  I did it 
> > first and the only parameters above that changed were "PTT 
> to Logger", 
> > which was set to "PTT to Rig Control" and "Radio" was set to Icom 
> > 756ProII (my rig).  Of course the Log Program was set to none.
> >
> > I'll send you the screen shots in a couple minutes.
> >
> > Hope this helps,
> >
> > Brad
> >
> > -----Original Message-----
> > From: [email protected] 
> > [mailto:[email protected]]On
> > Behalf Of Mel
> > Sent: Saturday, 13 March, 2004 1:59 PM
> > To: [email protected]
> > Subject: RE: [Logic] LOGic 7 / Hamscope & PTT
> >
> >
> > Please share your settings in Hamscope... Can you send me a screen 
> > shot of General Setup? (alt-print-screen)
> >
> > Send to [email protected]
> >
> > PTT works fine from Logic 7, but I can't get PTT to work from 
> > Hamscope... (everything else is fine)
> >
> > I had it working with Logic 6...
> >
> >
> > > -----Original Message-----
> > > From: [email protected]
> > [mailto:[email protected]]
> > > On Behalf Of Brad -
> > N8GLS
> > > Sent: March 13, 2004 13:06
> > > To: LOGic Reflector
> > > Subject: [Logic] LOGic 7 / Hamscope & PTT
> > >
> > >
> > > For Mel & others using Hamscope with LOGic 7
> > >
> > > PTT works fine from Hamscope, both stand-alone and linked
> > to LOGic 7.
> > > I'm using a RIGblaster plus and it keys it just fine.
> > >
> > > While fooling around in LOGic I did manage to get some 
> errors while 
> > > messing with the ports and setting up the CW and Voice/PTT.
> >  Haven't
> > > figured out just what is going on with that yet but suffice
> > to say for
> > > now that Hamscope works.
> > >
> > > After I make sure its not operator error (that could never
> > be, hi hi)
> > > I'll report any other problems.
> > >
> > >
> > > 73 de N8GLS, Brad
> > >
> > >
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected] 
> http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> > 
> _______________________________________________
> > LOGic mailing list
> > [email protected] http://mailman.qth.net/mailman/listinfo/logic
> >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected] http://mailman.qth.net/mailman/listinfo/logic
> >
> 
> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
> 
> 
> _______________________________________________
> LOGic mailing list
> [email protected] http://mailman.qth.net/mailman/listinfo/logic
> 