[Logic] Multiple Icom Rigs and CT-17 Level Converter

[Julio Peralta]

Try changing the CI-V baud rate for one of the radios in both the software
and in the menu of the radio. I'm using 2 PRO II and was able to get them to
not track using this method. I'm also using 2 CI-V interfaces but I don't
think you'll have to do that.

Let me know if it works...

Julio, W4HY

----- Original Message ----- 
From: "Bradford J. Williams - N8GLS" <n8gls@arrl.net>
To: "LOGic Reflector" <logic@mailman.qth.net>
Sent: Monday, October 27, 2003 7:58 PM
Subject: [Logic] Multiple Icom Rigs and CT-17 Level Converter


> Hi Group,
>
> I now have two Icom rigs interfaced to LOGic through a single Icom CT-17
> Level Converter.  Problem is that the frequency display in LOGic will not
> track either Icom radio in real time UNLESS I have CI-V Transceive enabled
> on both radios (of course, with CI-V enabled, the radios track each other
as
> they should and display in real time in LOGic), BUT, I'm not using them as
a
> separate radios in "transceive" mode, just two independent radios.
>
> Is there a bug in the Icom driver for LOGic that prevents the frequency
from
> tracking in real time (knob spinning) unless CI-V transceive is enabled on
> the radio(s)??
>
> RIgs are IC-756Pro II and IC-746Pro, LOGic is v6.0.617.
>
> Thanks,
>
> 73 de N8GLS, Brad
>
>
> _______________________________________________
> LOGic mailing list
> LOGic@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic
>