[Logic] serial keying under LOGic6

[Arthur Tan]

Ali,

Hi, maybe it's a WinNT/Win2000/WinXP issue?  I wasn't able to test
serial port keying under WinXP but I did test with WinME at my shack
and it works.  I took a serial interface that I use with
Writelog/CT/NA/TR/etc. and tried with LOGic.  I use a DB9 interface.
Voltage is asserted on pin 4, and pin 5 is ground.  (If you use a
DB25, voltage is asserted on pin 20, and pin 7 is ground.)  Also, use
"DTR."  Note, I am using the radio's VOX for keying and not PTT.

Have you tried your serial interface with other logging programs?

I hope this helps a little bit.

73, Art



----- Forwarded message from Ali Bubba <qt2bna1i@portone.com> -----

Date: Thu, 08 May 2003 17:46:36 -0400
Subject: Re: [Logic] HELP WITH LOGIC 6.0.162

Art,
Thanks. . . . everything works just fine with the exception of the CW set up.
Some had told me that Dennis is aware of this problem and will have a "fix"
soon.

Ali

> >From Ali Bubba <qt2bna1i@portone.com>:
>
> > CAN SOME ONE HELP ME?
> > I'm using the latest and greatest Logic, Love it. However, unlike the
> > Logic 5.X versions, I have been unable to get my radio to work with the
> > CW buffers etc.  As a matter of fact I cannot even get this version to
> > set up in the CW mode. I use an Ft1000(d) . This logic performs all the
> > functions that my previous  5.0 did with the exception of having it "set
> > up" for cw.  I have not been able to set up the keyer. I have tried
> > serial port com1 and/or com2. I tried Serial DTR and Serial RTS for the
> > keyer, again no cigar.  Which serial port pin does one use for  cw
> > keying and/or or cw keying ptt? serial or parallel.
> > Would appreciate someone's response.
> >
> > Thanks,
> > Ali