[Logic] Re: LOGic Two Radio Setup

[Jeff Griffin]

 You can use the set command in  forms, then  log. I think you can only set
two logforms to automatically come up when you boot the program.

73 Jeff kb2m

----- Original Message ----- 
From: "Dave Sublette" <k4to@arrl.net>
To: <logic@mailman.qth.net>
Sent: Friday, July 11, 2003 7:51 AM
Subject: Re: [Logic] Re: LOGic Two Radio Setup


> I run three radios and have also learned to bring up three log forms
> with associated radios and rotators. However, I have not learned how to
> "save" these forms so that the next time I boot LOGic they all come back
> up automatically. I have to set up all three logforms each time. Anyone
> got  an answer for this? BTW two of the lof forms use the same
> rotator...I haven't found a problem with this yet.
>
> Thanks,
>
> Dave, K4TO
>
> Jeff Griffin wrote:
>
> > I just open several logforms at one time . The form's containing the
> >previously logged data I just stack one on top of another. The select
data
> >to be logged window  I offset slightly and when all are open  so I can
click
> >on a corner of a particular radio window and bring it forward. I  then
can
> >click on a spot to tune the selected radio and log the freq and mode of
the
> >spot automatically in the top window. I have 2 radios attached, and a
> >satellite logging window. The sat log window doesn't have any radio
> >information, as the sat radio is attached to another computer (I might
try
> >to connect it as it is on a LAN). So the first entry you make in modes ,
and
> >band is carried to the next log entry. This all  works very well for me.
The
> >monitor real estate isn't a problem as the three sets of 2 windows are
> >stacked on top of each other....
> >
> >73 Jeff kb2m
> >
> >
> >
> >
> >_______________________________________________
> >LOGic mailing list
> >LOGic@mailman.qth.net
> >http://mailman.qth.net/mailman/listinfo/logic
> >
> >
> >
> >
>
> _______________________________________________
> LOGic mailing list
> LOGic@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic