[Logic] Re: LOGic Two Radio Setup

[Dave Sublette]

I run three radios and have also learned to bring up three log forms 
with associated radios and rotators. However, I have not learned how to 
"save" these forms so that the next time I boot LOGic they all come back 
up automatically. I have to set up all three logforms each time. Anyone 
got  an answer for this? BTW two of the lof forms use the same 
rotator...I haven't found a problem with this yet.

Thanks,

Dave, K4TO

Jeff Griffin wrote:

> I just open several logforms at one time . The form's containing the
>previously logged data I just stack one on top of another. The select data
>to be logged window  I offset slightly and when all are open  so I can click
>on a corner of a particular radio window and bring it forward. I  then can
>click on a spot to tune the selected radio and log the freq and mode of the
>spot automatically in the top window. I have 2 radios attached, and a
>satellite logging window. The sat log window doesn't have any radio
>information, as the sat radio is attached to another computer (I might try
>to connect it as it is on a LAN). So the first entry you make in modes , and
>band is carried to the next log entry. This all  works very well for me. The
>monitor real estate isn't a problem as the three sets of 2 windows are
>stacked on top of each other....
>
>73 Jeff kb2m
>
>
>
>
>_______________________________________________
>LOGic mailing list
>LOGic@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/logic
>
>
>  
>