[Logic] New Computer

[C.M. Christensen]

Hi Jim,
I don't know for sure what you filled in but when you go to the Setup
Station Information screen don't put your state or callsign on the left
hand side of the screen. Input your actual Lat and Lon according to
Logic's instructions and don't forgot the Minus sign if appropriate. You
can then put in the callsign, state, etc. on the right hand side of the
screen. Also, try leaving the Grid Square info off the screen and it
should fill that in too.
-- 
73, Chris AC�M


Jim Reid wrote:
> 
> Ok,  need help.  I have installed Logic 6 on the new computer;
> and transferred my log over from Logic 6 on the old computer.
> But.....
> 
> New computer is running XP Home,  as was the old one.
> On the new computer,  the program will NOT accept my station
> location in Setup!  It will accept KH6,  but not my specific
> QTH over here on Kauai;  using KH6 puts me in Honolulu and
> I am about 125 miles NW of that city,  hi.
> 
> Also,  it will not connect to the DX Summit;  in fact,  when attempting
> that,  the computer locks up!  And,  the header appears that
> Logic 6 is no longer responding.  And, pressing control, Alt,
> delete brings up the Task Manager.  Clicking on End Task
> accomplishes nothing.  So I go to the top,  and select Restart
> the Computer.  Then when opening Logic 6 again,  get the
> message that it was not shut down correctly,  so it Cleans.
> 
> Go check Station Set Up,  and it is back at -33 Lat,  the default
> setting,  but has kept my Longitude -- very strange.
> 
> Should I just undo Logic 6,  and re-enter the CD to load and
> start over;  then reload my log from the disk from the old,
> dead computer?  Or is there some obvious,  simple thing
> I am not doing to get this new machine up and running?
> 
> BTW,  QSO'd the Chatham Isl.  guys on 17m this morning.
> 
> 73,  Jim  KH7M