[Logic] 6.0.128 update beta

Wed, 20 Nov 2002 15:10:34 -0500

Thanks Jim Steve for the suggestions!  I hadn't considered these.  It's OK
to be "different" and I'll give it a try.  It nice to be part of a group
where (for the most part) constructive suggestions are made (as opposed to
the alternatives....).  BTW, I know that it there is a problem reading both
VFOs on Icom rigs.

Of course, I'd still be interested in having it work so the QSX frequency is
set to VFO B.  Isn't this the time of year for wishes... (Dennis, hint,
hint..)

Hope to hear some of you in CQWW!

73,

Bob

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Jim Brannigan
Sent: Wednesday, November 20, 2002 07:25
To: [email protected]
Subject: Re: [Logic] 6.0.128 update beta

In regular operation with my OMNI-VI+, I use VFO A.  When I hear DX
operating split, I set VFO B to the QSX frequency. and listen on VFO A. (to
log the split, I manually hit the "SPLIT" button on the screen radio panel,
or not since it really doesn't matter)

When I use SET from a QSX spot in the SPOT log,  VFO B is on the DX
frequency and VFO A is on the QSX frequency. (and the XMT frequency is
logged)

Other than being "different" there is nothing wrong with this.

Jim
> I have found the same issue with my 756 PRO II...However, the solution
> seems to verify that the buttons on the radio tool bar match the
> settings on the PRO II. For example that VFO A is selected and that the
> SPLIT function is either on or off according to the rig. Then the
> functions work properly after manually be synced. The issue here is that
> the software does not seem to sync with the PRO II properly to begin
> with...73 N3MX...Steve
>
> Hi Dennis,
>
> Thanks for the update and support.  Here's a bug to fix please.
>
> When using the SET rig button for split frequency, for my Icom 756ProII,
> the
> split is sent to the radio inverted.  That means that the VFO's are
> switched
> from what is intended.  For example, the DX TX frequency ends up in the
> B
> VFO (from which the local radio wants to TX).  Perhaps there is a way to
> allow the user to toggle this?  Thanks in advance.  I'd be happy to beta
> test a potential fix.
>
> Best,
>
> Bob

_______________________________________________
LOGic mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/logic
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 13-11-02

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 13-11-02