[Logic] QSX Radio frequency

Sat, 23 Mar 2002 11:54:46 -0500

A note to OMNI-VI+ users.
I find that if I set the split from the radio, Logic6 will not log the Xmt.
Freq.
If I set the split from the log window, the Xmt. freq. is logged and the
packet QSX is sent.
This is a problem with the Ten Tec software.
Jim

> Hi
> The split Frequency  works Fine for me and automatically on my
> Kenwood 950 SDX that is connected to the computer via com 1 via Kenwood
> interface IF-232C
> In other words if your radio is connected to the computer and logic can
> control it  the split frequency works automatically
>
> 73 Eli  4z5is
>
> Stern Eli  Advocate & Notary
> ham radio callsign    4Z5 IS
> ____________________________________
> [email protected]                  OFFICE
>
> Haberman Dovev & Stern advocates & notarie  Office
> 51 Wizman St Tel Aviv Israel
> FAX  00972 3 6962206
>
> [email protected]           HOME
>
> 2 sagie st P.O.BOX 728   Reut ISRAEL 71908
> Fax  00 972 8 9710010
>
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> On Behalf Of GilBaronW0MN
> Sent: Saturday, March 23, 2002 3:14 PM
> To: AA/Logic
> Subject: [Logic] QSX Radio frequency
>
> In the log form there is a field for transmit frequency when operating
> split. Is there a way to automatically update this field to the exact
> transmitted frequency as read from the rig rather than nothing or
> offset?
> I would like the program to read the other vfo and enter the frequency
> here.
> It would make sending spots so much more useful. On clusters if you have
> QSX
> (XMIT FREQ) then the spot logs will show this and logic users and others
> that have the feature can set the split automatically. Since the set rig
> automatically sets the split if on the spot log, that  means it has
> access
> to the other vfo. I assume there should be a way to read it also. Is
> there a
> way to do that or do you have to manually enter this field?
>
>
> Gil Baron http://webpages.charter.net/gbaron
> 44.08208 N 92.51263 W 1055'
> "Hierro candente, batir de repente"
>
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic