[Logic] QSX Radio frequency

Sat, 23 Mar 2002 08:44:21 -0600

Well you are correct. It reads it when you actually enter a station and
leave the field, guess I did not actually enter the log record as I did not
want to put a bad one in. Tried that now! THEN erased it:-)
Very nice and thanks for the heads up.

> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of John Tait
> Sent: Saturday, March 23, 2002 07:56
> To: [email protected]
> Subject: Re: [Logic] QSX Radio frequency
>
>
>
> Subject: [Logic] QSX Radio frequency
>
>
> > In the log form there is a field for transmit frequency when operating
> > split. Is there a way to automatically update this field to the exact
> > transmitted frequency as read from the rig rather than nothing
> or offset?
> > I would like the program to read the other vfo and enter the frequency
> here.
>
>  That's exactly what it does.. It  automatically reads the TX QRG, it also
> uploads this info with a spot..
>
> > It would make sending spots so much more useful. On clusters if you have
> QSX
> > (XMIT FREQ) then the spot logs will show this and logic users and others
> > that have the feature can set the split automatically. Since the set rig
> > automatically sets the split if on the spot log, that  means it
> has access
> > to the other vfo. I assume there should be a way to read it
> also. Is there
> a
> > way to do that or do you have to manually enter this field?
>
> LOGic has ALWAYS been able to do this...
>
>       73
>   John EI7BA
>
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>