[Logic] QSX Radio frequency

[C.M. Christensen]

John Tait wrote:
> 
> Subject: [Logic] QSX Radio frequency
> 
> > In the log form there is a field for transmit frequency when operating
> > split. Is there a way to automatically update this field to the exact
> > transmitted frequency as read from the rig rather than nothing or offset?
> > I would like the program to read the other vfo and enter the frequency
> here.
> 
>  That's exactly what it does.. It  automatically reads the TX QRG, it also
> uploads this info with a spot..
> 
> > It would make sending spots so much more useful. On clusters if you have
> QSX
> > (XMIT FREQ) then the spot logs will show this and logic users and others
> > that have the feature can set the split automatically. Since the set rig
> > automatically sets the split if on the spot log, that  means it has access
> > to the other vfo. I assume there should be a way to read it also. Is there
> a
> > way to do that or do you have to manually enter this field?
> 
> LOGic has ALWAYS been able to do this...
> 
>       73
>   John EI7BA
> 
> _______________________________________________
> LOGic mailing list
> LOGic@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/logic

To make it do this however you must manually enter the callsign and hit
tab. If you just click on the call in the spot log it will log those
frequencies instead of the ones from the radio.
-- 
73, Chris AC�M