[Logic] Digipan Interface

Fri, 18 Jan 2002 20:46:20 -0400

Same story here.

73,   Carl   VE9OV
----- Original Message -----
From: "Ross" <[email protected]>
To: <[email protected]>
Sent: Friday, January 18, 2002 3:58 AM
Subject: Re: [Logic] Digipan Interface

> Ok Joe yup it does the same thing on my computer after the second qso it
> just quits responding until I restart Logic again then the same thing..
All
> I did was try it one time when I installed it after putting on WinXP. I
> emailed Dennis and let him know too what our problem was..
>
>
> Ross
> ----- Original Message -----
> From: "Giasi, Joseph P., Jr." <[email protected]>
> To: <[email protected]>
> Cc: <[email protected]>; <[email protected]>
> Sent: Thursday, January 17, 2002 7:06 PM
> Subject: RE: [Logic] Digipan Interface
>
>
> > Ross, thanks for responding to my inquiry. Is there anything about your
> configuration or setup that might shed light on the following?
> >
> > I installed MixW 2.01 and started it up. Started up Logic5.3, unchecked
> "Digipan interface" and checked "MixW interface". Closed and restarted
> Logic5.3 with MixW 2.01 still running. Proceeded to test the interface by
> entering some dummy info in the
> > MixW minilog window. First record, the information is passed to Logic
> which creates a new entry. Second record, the information is passed to
> Logic. Third record, nothing is passed to Logic. If I close Logic (or even
> if I just close and reopen the
> > log) two more records can be passed from MixW to Logic, but never more
> than two. Both programs remain operational, but the interface stops. Tried
> several different CAT configurations under MixW (CAT on/CAT off/CAT
control
> via Logic) all without
> > success. I haven't tested to see if this problem is unique to XP, but
> suspect that this is so because of the problem I had with the Digipan
> interface. And yet you are running MixW and Logic together under XP
without
> any problem. (BTW-Are you running
> > XP-Home Edition or XP-Pro?) It acts like a buffer in the interface is
not
> clearing when the record is saved in the MixW log, but that is an
uneducated
> guess.
> >
> > I am copying Dennis on this email to see if he has encountered this
> problem and knows what the fix is.
> >
> > -----Original Message-----
> > From: Ross [mailto:[email protected]]
> > Sent: Tuesday, January 15, 2002 12:05 PM
> > To: [email protected]
> > Subject: Re: [Logic] Digipan Interface
> >
> >
> > I am using MixW with Logic5 running XP and it works..
> >
> >
> > Ross
> > ----- Original Message -----
> > From: "Giasi, Joseph P., Jr." <[email protected]>
> > To: "'[email protected]'" <[email protected]>
> > Sent: Tuesday, January 15, 2002 11:37 AM
> > Subject: [Logic] Digipan Interface
> >
> >
> > > I recently acquired a new computer for my shack which runs Windows XP.
> > Since the change, I have had no problems running Logic 5.3, including
> > control of my rig, both directly or using FT-Manager, and callbook
> > interfacing (RAC). However, I have been
> > > unable to get the Digipan interface to operate. I have what I believe
is
> > the latest version of Digipan (1.6d). I was operating Windows 98se on my
> old
> > computer and the Digipan interface ran like a dream. Isn't progress
> > wonderful?
> > >
> > > Here is what is happening: when I enter a callsign in the Digipan
> minilog
> > window, Logic as expected begins to create a new record. However, when I
> > save the Digipan entry, the information is not passed to Logic and Logic
> > stops responding. I then have
> > > to use the Windows task manager to shut down Logic. When I restart
> Logic,
> > the new entry has not been created, and any further entries in Digipan
are
> > not recognized by Logic.
> > >
> > > Does anyone have the Digipan interface running under XP? If so, can
you
> > tell me how you have it configured? Alternatively, I have been
considering
> a
> > switch to MixW. Is anyone successfully running the MixW interface under
> XP?
> > Thanks for any help.
> > >
> > > 73, de Joe Giasi, W2QQ
> > > _______________________________________________
> > > LOGic mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/logic
> > >
> >
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
> >
>
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>