[Logic] Digipan Interface

Fri, 18 Jan 2002 02:58:28 -0500

Ok Joe yup it does the same thing on my computer after the second qso it
just quits responding until I restart Logic again then the same thing.. All
I did was try it one time when I installed it after putting on WinXP. I
emailed Dennis and let him know too what our problem was..

Ross
----- Original Message -----
From: "Giasi, Joseph P., Jr." <[email protected]>
To: <[email protected]>
Cc: <[email protected]>; <[email protected]>
Sent: Thursday, January 17, 2002 7:06 PM
Subject: RE: [Logic] Digipan Interface

> Ross, thanks for responding to my inquiry. Is there anything about your
configuration or setup that might shed light on the following?
>
> I installed MixW 2.01 and started it up. Started up Logic5.3, unchecked
"Digipan interface" and checked "MixW interface". Closed and restarted
Logic5.3 with MixW 2.01 still running. Proceeded to test the interface by
entering some dummy info in the
> MixW minilog window. First record, the information is passed to Logic
which creates a new entry. Second record, the information is passed to
Logic. Third record, nothing is passed to Logic. If I close Logic (or even
if I just close and reopen the
> log) two more records can be passed from MixW to Logic, but never more
than two. Both programs remain operational, but the interface stops. Tried
several different CAT configurations under MixW (CAT on/CAT off/CAT control
via Logic) all without
> success. I haven't tested to see if this problem is unique to XP, but
suspect that this is so because of the problem I had with the Digipan
interface. And yet you are running MixW and Logic together under XP without
any problem. (BTW-Are you running
> XP-Home Edition or XP-Pro?) It acts like a buffer in the interface is not
clearing when the record is saved in the MixW log, but that is an uneducated
guess.
>
> I am copying Dennis on this email to see if he has encountered this
problem and knows what the fix is.
>
> -----Original Message-----
> From: Ross [mailto:[email protected]]
> Sent: Tuesday, January 15, 2002 12:05 PM
> To: [email protected]
> Subject: Re: [Logic] Digipan Interface
>
>
> I am using MixW with Logic5 running XP and it works..
>
>
> Ross
> ----- Original Message -----
> From: "Giasi, Joseph P., Jr." <[email protected]>
> To: "'[email protected]'" <[email protected]>
> Sent: Tuesday, January 15, 2002 11:37 AM
> Subject: [Logic] Digipan Interface
>
>
> > I recently acquired a new computer for my shack which runs Windows XP.
> Since the change, I have had no problems running Logic 5.3, including
> control of my rig, both directly or using FT-Manager, and callbook
> interfacing (RAC). However, I have been
> > unable to get the Digipan interface to operate. I have what I believe is
> the latest version of Digipan (1.6d). I was operating Windows 98se on my
old
> computer and the Digipan interface ran like a dream. Isn't progress
> wonderful?
> >
> > Here is what is happening: when I enter a callsign in the Digipan
minilog
> window, Logic as expected begins to create a new record. However, when I
> save the Digipan entry, the information is not passed to Logic and Logic
> stops responding. I then have
> > to use the Windows task manager to shut down Logic. When I restart
Logic,
> the new entry has not been created, and any further entries in Digipan are
> not recognized by Logic.
> >
> > Does anyone have the Digipan interface running under XP? If so, can you
> tell me how you have it configured? Alternatively, I have been considering
a
> switch to MixW. Is anyone successfully running the MixW interface under
XP?
> Thanks for any help.
> >
> > 73, de Joe Giasi, W2QQ
> > _______________________________________________
> > LOGic mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/logic
> >
>
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
> _______________________________________________
> LOGic mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/logic
>
>