Re[2]: [Logic] Rigblaster Plus, Logic6, CW Keying

Mon, 1 Apr 2002 21:31:04 -0700

Hello Stephen,

Thanks  for  the  help.  Changing the plug did it.  The manual says to
use a stereo plug.  When I changed to a mono plug it worked fine.

-- 
73,

Tom                            mailto:[email protected]

Monday, April 1, 2002, 8:26:45 AM, you wrote:

SJS> Yes I have the exact setup except I am running a PRO II but using the the 
SJS> same 5C hex address as the PRO. Everything works great. Problem I had in the 
SJS> begining was similar to your issue and turned out to be the diagram 
SJS> incorrectly stated how to connect to the 1/4inch plug in the rigblaster plus 
SJS> manual. I suggest you change/reverse your tip and ring solder connections 
SJS> and that should fix the problem. Now if it was working prior to this for cw 
SJS> keying and all you did was a software upgrade to logic 6 or something then 
SJS> more information would be helpful.

SJS> Steve...

SJS> NL7ZL <[email protected]> said:

>> 
>> Has any one gotten a Rigblaster Plus, Logic 6, and Icom 756Pro to work with
>> the  keyer.   I  have  the  rigbalster set to the factory defaults for
>> RTS/DTS.  The keyer will key the transmitter but no audio is heard and
>> there is no output power from the radio.
>> 
>> I have MixW working fine and can send CW as well as the other modes.
>> 
>> 73,
>> 
>> Tom
>> NL7ZL
>> 
>> _______________________________________________
>> LOGic mailing list
>> [email protected]
>> http://mailman.qth.net/mailman/listinfo/logic
>> 