[Laser] Re : Re : Strange effect

[Garnier Yves]

Some info about silicon LED properties to this link :
http://doc.utwente.nl/53585/1/01546659.pdf
73 

Yves F1AVY
http://f1avyopto.wifeo.com


________________________________
 De : Tim Toast <toasty256 at yahoo.com>
À : laser mailinglist <laser at mailman.qth.net> 
Envoyé le : Vendredi 16 mars 2012 12h38
Objet : [Laser] Re : Strange effect
 
Dave,
That is probably the reason. Without looking it up, that seems to ring a bell somewhere 
about silicon emitting in the deep IR. I hadn't fully realized till now that all LEDs might not 
have the near same detect + emit wavelengths. It makes me wonder how some of the 
other LED compositions  wavelengths are arranged too. I think i've read, in the 
UKnanowaves group, they had used green and blue LEDs in their (single led type) 
transceivers with good results. Those both may use gallium arsenide though, i don't 
know. I was thinking the blue LEDs used a nitride based construction.
 
Yves, 
You may be able to tell whether the pyrodetector is seeing the actual 1.1 micron 
radiation or the 10 micron heat, by turning the silicon detector on and off rapidly. 
If the pyrodetector is just seeing the heat generated, then the silicon detector should 
continue to "glow" for a short time after it is turned off (as it cools off) rather than a 
crisp instant on/off responce.. It may be sensitive to a combination of both even.
 
-toast
 
 
 
 
______________________________________________________________
Laser mailing list
Home: http://mailman.qth.net/mailman/listinfo/laser
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Laser at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html