[Laser] All Electronics' PIN diode

Wed, 9 Jan 2002 14:39:56 -0800 (PST)

Hummm...they list the pd-4 as low quanity ship if
available, while hopefully the pd-3 is available in
better quanities....so all that want it have a
chance...I did put email in to them requesting this
info...hate to use 800 lines for questions....

Thanks again...the specs are indeed very good for
laser communication purposes...

Bill
--- W2MXW <[email protected]> wrote:
> Actually, while the PD-4 unit mentioned by Cliff
> below is also available,
> and is the same diode but with a (removable) green
> filter to correct the
> response curve to CIE standards, the unit I
> mentioned in my previous post is
> cat # PD-3, and costs $1 less than the former. It's
> not listed in the
> catalog but if you go to the online order form and
> type in "PD-3" it will
> show up (I found out about it because it's in the
> New items section and in
> flyers which they sent me.) Of course, the filtered
> unit does have the added
> advantage of a filter mount, into which narrowband
> dielectric filters of 25
> mm diam. should fit nicely after removing the green
> CIE filter.
> 
> Jonathan Smick W2MXW
> 
> Jim, the detector is on page 82 of the fall catalog
> order #PD-4,  $6
> The green filter in the window of the detector is
> removable and seems
> about the same size as 635 nM filters we got from
> Haltex some years back.
> I do hope as this should make quite a unit!
> 
> Cliff Buttschardt K7RR
> 
> _______________________________________________
> Laser mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/laser

__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/