[Kenwood] Top/bottom case screw

[Steve Sutfin]

Always a good idea. Ace Hardware is my friend except this time and I also have a local Fastenal. Both didn’t have the right size but I should check again. I did find some online at Belmetric but I don’t need 50.
Thanks for the reply,
Steve K7DNA


> On Jan 16, 2022, at 4:54 PM, Mike Duke, K5XU <k5xu at comcast.net> wrote:
> 
> If you have a good Ace Hardware store nearby, take one of the screws to that store.
> The one not far from me has rescued me many times, including the replacement of screws from a rig that were damaged by the use of the wrong screwdriver.
> 
> They will sell you as few or as many as you need.
> 
> K5XU
> 
> -----Original Message-----
> From: kenwood-bounces at mailman.qth.net [mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Steve Sutfin
> Sent: Sunday, January 16, 2022 3:25 PM
> To: kenwood at mailman.qth.net
> Subject: [Kenwood] Top/bottom case screw
> 
> Hello to the list,
> 
> I dug into my TR-9500 to trace down a tx issue so of course I’ve lost one case screw. Besides the TR-9000 series I’d bet it's been used on others. It’s a countersunk oval head Phillips machine screw. M3 I believe.
> I can probably buy a pack of 50 but does anybody have just one?
> 73,
> Steve K7DNA
> 
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html