[Kenwood] Top/bottom case screw

[Mike Duke, K5XU]

If you have a good Ace Hardware store nearby, take one of the screws to that store.
The one not far from me has rescued me many times, including the replacement of screws from a rig that were damaged by the use of the wrong screwdriver.

They will sell you as few or as many as you need.

K5XU

-----Original Message-----
From: kenwood-bounces at mailman.qth.net [mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Steve Sutfin
Sent: Sunday, January 16, 2022 3:25 PM
To: kenwood at mailman.qth.net
Subject: [Kenwood] Top/bottom case screw

Hello to the list,

 I dug into my TR-9500 to trace down a tx issue so of course I’ve lost one case screw. Besides the TR-9000 series I’d bet it's been used on others. It’s a countersunk oval head Phillips machine screw. M3 I believe.
 I can probably buy a pack of 50 but does anybody have just one?
73,
Steve K7DNA

______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html