[Kenwood] Using the AT-50 with a non-Kenwood transceiver

[Clif Holland]

The cable ends are available and the AT-50 SM is here www.mods.dk

--

Clif Holland KA5IPF
www.avvid.com

--

On 9/18/2021 4:04 PM, chuck via Kenwood wrote:
> The manual for the AT-50 calls for an optional "power cable" and "conversion cable" to be used when connecting the tuner to a non-Kenwood rig.
> I have an AT-50 (the TS-50 died long ago) and would like to pair it with a non-Kenwood transceiver.
> AFAIK, the cable un-obtainable.  I'm capable of building up one but I've been unable to source any information about the wiring.  And no, Google has not been a friend this time.
> Does anyone have knowledge of the wiring of this cable?  A diagram (schematic) of the pin-out would be helpful.
> Thanks for the read.
> 73ChuckW4MIL
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html