[Kenwood] PG2N power connector

[Jim Pruitt]

Hello John.

No. The VHF radios (TM261, TM271, TM281, TM471, etc) use a 2 pin Tee 
connector that to me looks like some automotive Molex plugs I have seen 
in the past.

Thank you.

Jim Pruitt


On 12/4/2021 6:21 AM, JF Samuels - K2CIB wrote:
> Jim, there are two types: a 6-pin, used for models up to TS-870 or so 
> and a 4-pin like the ones used for my TS-590 and Icom.  I have ordered 
> similar ones (like a straight 4-pin for my Flex-5000) from Mouser.
> *
>
> */73, John/*
>
>
>
> *
> On 12/4/2021 3:53 AM, Jim Pruitt wrote:
>> Can anyone tell me the Molex part number for the power plug on the 
>> end of the PG2N power cable that plugs into the (mostly vhf/uhf 
>> Kenwood) radio?  That Tee connector reminds me of ones i have seen on 
>> automotive plugs.  Yes I know I can buy a PG2N or a Chinese clone for 
>> $17 but all I need is that connector and $17 is more than I want to 
>> pay for something when all I need is the connector itself.
>>
>> Google has not been my friend in looking for that information so if 
>> anyone has a supplier and part number (Molex or Sullins or...) I 
>> would appreciate knowing what it is.  And no,  I do not want to 
>> change it for a PowerPole.
>>
>> Thank you.
>>
>> Jim Pruitt
>> WA7DUY
>> ______________________________________________________________
>> Kenwood mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Kenwood at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>