[Kenwood] TS-930S Question

[Clif Holland]

That would normally indicate it has the Piexx digital unit installed. 
That's the only way to get computer control on the 930. A nice upgrade. 
   Go to www.piexx.com

Clif Holland KA5IPF
www.avvid.com
214-850-0973

On 9/15/2017 4:10 PM, Rick Markey wrote:
> I just "inherited" a Kenwood TS-930S which seems to work just fine.
> Someone replaced the meter lamps with blue LEDs which is a nice touch.
>
> However there is a cable that has been added that hangs out the back of
> the radio.  It has a DB9 connector and three wires are connected.
> Presumably this is an aftermarket RS-232 connection?  The wire runs
> underneath the speaker and I have not taken the radio apart to see where
> it is connected.
>
> Just wondered if anyone on the list had seen this and might have a clue
> as to what it is?  There was no documentation with the radio other than
> a copy of the manual, so I have no idea what modifications may have been
> made to it.
>
> Thanks,
>
> Rick, KN3C
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>