[Kenwood] ASTRON RS-35M

[Tim Billingsley]

On Nov 24, 2016 21:34, "Michael Tortorella" <w2iy at verizon.net> wrote:
>
> Folks,
> Just wanted to share another Astron RS30M story....no output....turned out
> the voltage set trimpot on the regulator board was dirty.  Hit it with
> cleaner, exercised a little, and now all fine.  Hope this helps someone.
> 73
> Mike W2IY

Thanks Mike. I will check that also. I also saw mention of removing it and
putting it on the "backside" of the regulator board for easier access. I
really don't think there is room to do it on this PSU, but they may have
used a different style of pot or it may have been mentioned for a different
PSU model. I have not measured the clearance right see it will fit yet.