[Kenwood] ASTRON RS-35M

[Michael Tortorella]

Folks,
Just wanted to share another Astron RS30M story....no output....turned out
the voltage set trimpot on the regulator board was dirty.  Hit it with
cleaner, exercised a little, and now all fine.  Hope this helps someone.
73
Mike W2IY

-----Original Message-----
From: Kenwood [mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Tim
Billingsley
Sent: Thursday, November 24, 2016 9:01 PM
To: kenwood at mailman.qth.net; TexasTradersNet
Subject: Re: [Kenwood] ASTRON RS-35M

Sorry, I had a dumba$$  moment.

Those are cap values not voltage test values. I was so focused on figuring
out the voltage errors I forgot what I was looking at until I looked at the
values going into the LM723.

Sorry...
______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Kenwood at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html