[Kenwood] TS-430S Xverter Connector.

[Joe]

Yeah it is a special pin configuration.

Thank You Kenwood

NOT!
So far between the 2 plugs bought, and crazy shipping charges, I'm 
closing in on 30 bucks for this connector. and hopefully I did not ruin 
the jack in the radio trying the wrong 8 pin connector who knows what 
that will cost to replace

Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 9/4/2015 7:22 PM, jcn1foj at aol.com wrote:
> Joe , Not Sure about the jack being proprietary , But Ham Radio Outlet 
> lists an 8 pin DIN connector for all Kenwoods , so it probably is.
> -----Original Message-----
> From: Joe <nss at mwt.net>
> To: Kenwood Mail List <kenwood at mailman.qth.net>
> Sent: Fri, Sep 4, 2015 6:07 pm
> Subject: [Kenwood] TS-430S Xverter Connector.
>
> Question, Is that 8 pin connector for the transverter jack a like 
> proprietary Kenwood plug? I bought an 8 pin one from digikey, and it 
> arrived today, I tried to push it in just to test it out and when 
> completely assembled it just won't go in. So I looked closely and the 
> pinout pattern looks good the like keyway thing is also in the right 
> place. So I took it apart and tried just the pins part and no go it 
> appears the pins are too big to fit into the holes. Anyone know if 
> this is a special kenwood plug? Or why this won't go in? Joe WB9SBD -- 
> Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com 
> http://www.idle-tyme.com 
> ______________________________________________________________ Kenwood 
> mailing list Home: http://mailman.qth.net/mailman/listinfo/kenwood 
> Help: http://mailman.qth.net/mmfaq.htm Post: 
> mailto:Kenwood at mailman.qth.net This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html