[Kenwood] Power out adjust for TS870S FM 100 watts to 140 watts.

[Robert Rode]

,,Wait until you see what new finals are going to cost you !!


On Tue, Mar 18, 2014 at 4:31 PM, Clif <clif at avvid.com> wrote:

> Why?
>
> There are other steps that have to be followed also.
>
>
> On Tue, Mar 18, 2014 at 3:30 PM, Terry Clinard <tclinard at hotmail.com>
> wrote:
>
> > Has anyone made this adjustment and do they recommend where it does not
> > harm the final output transistors?  If someone has done this I need
> > assistance with knowing one step in the procedure.  There are 8 steps in
> > the procedure.  I will skip to the one I do not understand as follows:
> >
> >
> >
> > -- I can get to the Hidden window ok and the "A7" display for 100 watts
> > power adjustment.
> >
> > -- Next step is to press PTT ( I assume this is in CW mode key down, then
> > rotate RIT/XIT  knob until you see 140 watts in the display
> >
> > -- Then press the UP key to confirm.  What I do not understand is that
> you
> > still keep the PTT engaged or at this point do you not transmit a
> carrier?
> >
> > --  I understand how to turn the M.CH/VFO.CH knob to "ba" to write the
> > EEPROM and then hit the UP button to write it, but during this part do
> you
> > still transmit the carrier or should the carrier be turned off?
> >
> >
> >
> > Any comments would be appreciated.
> >
> > Terry WA8OPR
> >
> > ______________________________________________________________
> > Kenwood mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/kenwood
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Kenwood at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
>
>
>
> --
> Clif Holland KA5IPF
> www.avvid.com
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>