[Kenwood] TS 140s Power Adjust

[Robert Rode]

...Ok, partner, many thanks,   I'll give it a good look, sure need that
mod...73 Robert..


On Sun, Mar 16, 2014 at 10:17 PM, Tim <tim at ke4ke.com> wrote:

>
> You can verify this, but it looks like you use pin 6 of the remote jack
> for the negative voltage input on the TS-140s.
>
> So you set the power for 100 watts using the front panel control and then
> adjust the voltage from the 9 volt battery to get the power down to what
> you would like.
>
>
> Tim
> KE4KE
>
>
>
>
> On 03/16/2014 09:59 PM, Robert Rode wrote:
>
> ...Tim, if you find that diagram, I sure wud like a copy,..Mine is about
>  stuck full power..same thing, would like to run maybe qrp and at least
> about 50 watts or so,.. was this your idea ?  thanks  W9ESX?Robert
>
>
> On Sun, Mar 16, 2014 at 9:40 PM, Tim <tim at ke4ke.com> wrote:
>
>> Yes!
>>
>> Several years ago I had a TS-140s and I used a 9 volt battery and a
>> potentiometer, maybe 5 or 10k? into the ALC input. It worked great. See
>> what you can find on a search. I did find one thing, but have yet to find
>> the diagram. I may have it in a file somewhere.
>>
>>
>> Tim
>> KE4KE
>>
>>
>>
>>
>> On 03/16/2014 08:58 PM, JD Hill wrote:
>>
>>> Hello, I imagine this has been thoroughly discussed at some point, but I
>>> am using a TS-140S as my main station, and I like to run mostly QRP levels
>>> 3-5 watts. My question is: Is there any way whatsoever to control the power
>>> output with or (modified) slide control? As I recall, it is a dual 1 k
>>> potentiometer, but they make lousy controls for this use.
>>>
>>> Thank you and 73,
>>>
>>> Jimmy D. Hill,  W9JDH
>>> ____________________________________________________________
>>> Fast-Growing Industry
>>> A New Player In The Booming Bottled Water Market.
>>> http://thirdpartyoffers.netzero.net/TGL3241/532656f5d1a0156f514a8st03vuc
>>> ______________________________________________________________
>>> Kenwood mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Kenwood at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>> ______________________________________________________________
>> Kenwood mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Kenwood at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
>