[Kenwood] TS450S problem

[Clif Holland]

Put the 455 filter select to 2.7.

Clif Holland KA5IPF
www.avvid.com




----- Original Message ----- 
From: "Jaime Gomez" <cwdx.hk1n at gmail.com>
To: <kenwood at mailman.qth.net>
Sent: Monday, March 25, 2013 3:46 PM
Subject: [Kenwood] TS450S problem


>I am repairing a friend's TS450S that does not discriminate between LSB or
> USB, no matter which one you choose you can receive a LSB signal in both
> positions of the mode switch, same with an USB signal, in other words it 
> is
> working in Double Side Band.
> I found the traditional leaking C104, replaced it and removed the filters,
> checked all pcb traces and cleaned the board very well, I thought it could
> have been produced by the capacitor leakage but it is not, any hints?
>
> Appreciate any help,
>
> -- 
> 73,
> Jim, HK1N
>
> President DXARC - DX Colombia Amateur Radio Club
> *Malpe**lo Isl. HK0TU 1990 & H**K0NA 2012 Team Member/ hk0na.com *
> Araucaria DX Group
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html