[Kenwood] Interface connectio

[Michael Brown]

Hi Peter

I am unfamiliar with your software, but sometimes demo software does not 
give you all the functions, although sometimes it does. I have used rig 
control for the last 12 years with 850's I've owned using different contest 
logging software and general logging software. The parameters that have 
worked are:

Comport: x (whatever comport you are using. I would try RS 232 over usb if 
that's possible)
Baud Rate: 4800
Data Bits:   8
Stop Bits   2
Parity:       None

You may need to check your bios and see if the comports are turned on. Here 
are some of the programs that are free now that I have had working over the 
years. My interface BTW, is a 3rd party one from W1GEE that has always 
worked well. At $40, it was much more affordable then the Kenwood IF-232.

CT or CTwin now that I am using Windows XP. Log-EQF demo, TRlog (not free), 
WriteLog (not free), N1MM Contest logger (free) and TR4W beta (Windows 
contest logger similar to TRlog).

GL Peter and keep us posted.

73, Mike K9MI





----- Original Message ----- 
From: "Peter Ravn" <fasan5 at privat.dk>
To: <Kenwood at mailman.qth.net>
Sent: Sunday, October 25, 2009 10:50
Subject: [Kenwood] Interface connectio


> The Kenwood CAT interface from ZLP Electronics in the UK is said to do 
> verything the original Kenwood IF-232 does, but it does not connect my 
> TS850 and TS950SDX to any of my two personal computers, neither on the USB 
> nor on the RS232 comport. I am using the nGenLog DEMO log programme and 
> have carefully followed the instructions. So what do I do wrong?
>
> 73 de Peter
> OZ8CTH
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html