[Kenwood] TS-570 and HRD MCW
Mike Rhodes
w8dn at roadrunner.com
Sun Jan 4 14:04:03 EST 2009
Len,
As I reread your note, I see that I may have misunderstood your
question but my first questin still remains. WHY ??
If you are having problems RECEIVING when trying to run CW (mcw but
not really) it is because of the built in offset of the receiver when in
USB mode vs CW mode. To eliminate any more pain, as the doctor says when
told 'It only hurts when I do this", "Duh, don't do it then". You loose
the benefit of any CW filtering you might have available plus the
already discovered problems you are having.
Mike / W8DN
Mike Rhodes wrote:
> Len,
> First, if you are able to run true cw, why are you wanting to run MCW
> (which is a bit of a misnomer I might add)?
> Second, since, when you run MCW, you are actually in USB mode, you
> will have to use the audio monitor function of your rig in order to
> hear the audio signal (as opposed to the sidetone generator which will
> function in true cw mode). I don't know how you are hooked to the rig
> but, if the mic is not disconnected, you will probably end up with
> nothing more than horrendous feedback.
>
> Mike / W8DN
>
> Len snyder wrote:
>> Hi all. I've been confused most of my life it seems but never more
>> than lately trying to get my HRD program to work in the MCW mode.
>>
>> The HRD MCW mode sends fine under USB and I can hear CW in the CW
>> mode but when I send using the USB mode that is necessary for MCW to
>> work, I no longer hear the CW coming in and have to change back to CW
>> mode to hear the code.
>>
>> I've tried to adjust the frequency so that I can hear the CW signal
>> under USB but it's a real pain fooling around with it each time. Can
>> someone tell me what I might have set up wrong on my TS-570 (I am
>> assuming it's a filter or something else like that)? I've contacted
>> the helpers at HRD but it's obvious from their replies that I've worn
>> out their good nature and they're sick of helping me. Any information
>> you could send me would be greatly appreciated.
>>
>> Len KD8CWP.
>>
>> P.S. You are more than welcome to send me an e-mail directly if you
>> are so inclined. kd8cwp at arrl.net
>>
>>
>>
>> ______________________________________________________________
>> Kenwood mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Kenwood at mailman.qth.net
>>
>
More information about the Kenwood
mailing list