[Kenwood] TS-940S USB-LSB

[Bill VanOrden K7BVO]

I too would like some real comparisons on the two materials.

 

I have both and the DeOxit stuff is a foamy treatment that leaves a sticky
film on anything it is sprayed on. I used it on a  couple of contacts and
then cleaned it off because of the consistency of the material.  The
Stabilant is a thin liquid, not a coating.

 

I have problems with the thick coating, to me it is like using a grease on a
contact, it may keep water and corrosion out, but at what sacrifice to
contact integrity.  In my personal and professional lives I have used the
stabilant and found it to cure and prevent contact related problems.  

 

Your mileage will vary


Beevo (aka Bill VanOrden)  K7BVO

CONFIDENTIALITY NOTICE     Attention: This email is intended for the sole
use of the intended recipient(s) and may contain confidential or privileged
information. No one is authorized to copy or re-use this email or any
information contained in it. If you are not the intended recipient, we
request that you please notify us by reply email and destroy all copies of
the message and any attachments.   Thank you for your cooperation.

 

From: Avi - Modi'im Orchards [mailto:tiavi at bezeqint.net] 
Sent: Saturday, January 03, 2009 12:24 PM
To: Bill VanOrden K7BVO; kenwood at mailman.qth.net
Subject: Re: [Kenwood] TS-940S USB-LSB

 

Does anyone have comparative, anecdotal experience with using Stabilant as
opposed to the deOxit line of products, of which I've just laid in what I
hope is a lifetime supply, considering their prices!

 

-avi 4X6UA

----- Original Message ----- 

From: Bill VanOrden K7BVO <mailto:k7bvo at cox.net>  

To: kenwood at mailman.qth.net 

Sent: Saturday, January 03, 2009 03:00

Subject: RE: [Kenwood] TS-940S USB-LSB

 

I would also recommend using this when you do the “Unplug/Plug ‘n’ Play:
http://www.stabilant.com/llsting.htm 

 

http://www.stabilant.com/revrw04h.htm 

 

As an automotive electrical and on board computer diagnostician for the last
30+ years, I have been using it for the last 9-10 years with extreme
success!  It is especially helpful on tin plated connectors.

Beevo (aka Bill VanOrden)  K7BVO

CONFIDENTIALITY NOTICE     Attention: This email is intended for the sole
use of the intended recipient(s) and may contain confidential or privileged
information. No one is authorized to copy or re-use this email or any
information contained in it. If you are not the intended recipient, we
request that you please notify us by reply email and destroy all copies of
the message and any attachments.   Thank you for your cooperation.

 

From: kenwood-bounces at mailman.qth.net
[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of WBØGZR Biker DaddyDawg
Sent: Friday, January 02, 2009 4:55 PM
To: kenwood at mailman.qth.net
Subject: [Kenwood] TS-940S USB-LSB

 

I want to thank John @ LPC Wireless for helping with my USB & LSB trouble on
my TS-940S. He was the only one that knew how to fix it. It turned out to be
the Digital A board. Unplugging each plug then plugging them all back in
fixed it. Also I found out it fix the SSB Slope Turn control which was to be
my next fix so got 2 in 1. 

Thanks John & 73's Rick WBØGZR
 

  _____  

______________________________________________________________
Kenwood mailing list
Home: http://mailman.qth.net/mailman/listinfo/kenwood
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Kenwood at mailman.qth.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/kenwood/attachments/20090103/77d01d42/attachment-0001.htm