[Kenwood] Kenwood TS480SAT AF gain
Phil Florig
W9IXX at arrl.net
Mon Sep 15 11:32:30 EDT 2008
Hi Tom,
I have the TS480HX and is the same. In case you didn't get
an answer yet might try the following.
Make sure the squelch control is totally counter clockwise.
Also check that the RF gain control is set to max for starters. This is
set using the #5 Mic button by holding down for a sec or 2 and adj for
100.
Also check for the right ant. #1 or #2
All sounds basic but have been there as others have also.
73 Phil W9IXX
At 18:24 9/14/2008, you wrote:
>Fellow Kenwood TS480SAT users:
>
>Today I was installing my TS480SAT for mobile use and when I first
>installed the unit the AF (volume) was fine, but now even with the AF gain
>turned all the way clockwise, hardly a whisper. Did I accidentally hit
>the wrong switch?
>
>I've tried the attenuation switch and everything else in the instruction
>manual, but still nothing.
>
>Any suggestions greatly appreciated since my XYL and I are leaving on a
>roadtrip Monday AM.
>
>73 de Tom, WW5L
>
>
>
>______________________________________________________________
>Kenwood mailing list
>Home: http://mailman.qth.net/mailman/listinfo/kenwood
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:Kenwood at mailman.qth.net
-----------------------------------------------
Philip Florig e-mail:pflorig at ieee.org
115 Horne Rd. (or):W9IXX at arrl.net
Columbus, NC. 28722 amateur radio:W9IXX
USA MARS:AAR4XX
Web: WWW.W9IXX.com
team member: AH1A-C6DX-CY0AA-J3A-KH8SI-VP2MX
also: C6AXX-J3X-KH8/-T30,31,32,33P-VP2MPF
-ARRL,CDXA,MARS,METRO DX CLUB,NIDXA,NCDXCC,QCWA
-----------------------------------------------
ELX Systems Philip Florig
115 Horne Rd. tel: 1-828-863-2048
Columbus, NC. 28722 fax:1-828-863-2049
USA e-mail: pflorig at ieee.org
Organizations: IEEE Life Member, WNC IEEE
**** INDUSTRIAL POWER SUPPLIES & CONTROLS ****
-----------------------------------------------
More information about the Kenwood
mailing list