[Kenwood] TS-430 PLL Problem...

[Steve Kent]

Hi Ed:

Okay.  I took a look at it. If you START tuning UP form 28.999 this is
what happens:

28.999 Radio TX & RX OK on indicated freq.

29.000-29.365 Radio stays on 29.365, TX & RX

29.366-29.499 Tunes Fine, TX & RX

29.500-29.865- Radio stays on 29.865, TX & RX

29.866-29.999 Tunes Fine, TX & RX

This repeats for every 1Mhz segment, spanning the entire coverage of the 
radio.

Best Regards & 73,
Steve Kent - KW5CQ


> Steve Kent wrote:
>> Hi Ed:
>>
>> Thanks for the reply!
>>
>> Hmmm. I'll have to verify what it is doing.  I don't remember 
>> specifically now that you mention it.
>>
>> Let me check it out tonight and I'll send you an email.
>>
>> Regards & 73,
>> Steve KW5CQ
>>
>> ma.locksmith at juno.com wrote:
>>> Before I start to attempt looking at the data I have for the 430, what
>>> happens when you tune UP instead of down....
>>>
>>> Specifically, 29.500 up....  does it jump to 29.880 when the display 
>>> goes
>>> to 29.501?
>>>
>>> Ed
>>>
>>> On Mon, 11 Feb 2008 14:04:57 -0600 Steve Kent <skent at ix.netcom.com>
>>> writes:
>>>  
>>>> All:
>>>>
>>>>
>>>> Here is an example:
>>>> Let's take the 30.000 Mhz upper edge as a start and tune down from 
>>>> there....
>>>>
>>>> 30.000-29.880 Tunes Fine, TX & RX
>>>> 29.880-29.501 Radio stays on 29.880, TX & RX
>>>> 29.500-29.380 Tunes Fine, TX & RX
>>>> 29.380-28.999 Radio stays on 29.380, TX & RX
>>>>
>>>>     
>>>
>>>   
> 
> 
>