[Kenwood] Kenwood TS-850 SCHEMATIC

[Peter Markavage]

In a pinch, scanned sheets into a PDF file are better than nothing. Of
course, the line fade on small shaded paths, the trimming of sheets
(since many times the large sheets 11X24 or 11X33 etc. are scanned at
8.5X11 sheet sections), the taping to have a complete schematic sheet or
assembly board drawing, the registration of lines at the sheet's
intersection, etc. can be a pain when you're trying to do service.

Pete, wa2cwa

On Thu, 2 Mar 2006 10:28:00 -0800 "Kenwood" <kenwood at cox.net> writes:
> Hi Paul -- hmmm ---  well, here's the schematic PDF  -- feel free to 
> 
> download.  NOT perfect, but if you don't have one, better than a jab 
> in the 
> eye with a frozen salmon!
> 
> 
> http://aa6dx.com/Ham/Kenwood/850Schematic.pdf
> 
> Careful .. big file .. 18.6 MB ... IF dial-up, go to lunch, perhaps 
> dinner, 
> too!  HIHI ... Mark  AA6DX
> 
> 
> ----- Original Message ----- 
> From: "Paul Pagel" <ppagel at sbcglobal.net>
> To: <Kenwood at mailman.qth.net>
> Sent: Thursday, March 02, 2006 8:46 AM
> Subject: [Kenwood] Kenwood TS-850 Service Manuals
> 
> 
> Although it's good to have the PDFs of the TS-850S Service Manual, 
> if
> you're looking for a *complete* Service Manual (ie, with all the
> schematics, PC-board and component-placement information), you 
> won't
> find them
> in the PDFs, you'll need to buy a paper copy. They're available 
> from
> Peter Markavage manualman at juno.com and other manual providers.
> 
>   Here are some other manual sites I found while looking for a 
> Kenwood
> TS-850S Service Manual months ago:
> 
>   http://www.w7fg.com/manual.txt
> 
>   http://hamradiomanuals.com/
> 
>   http://www.sarrio.com/sarrio/rsman2.html
> (same site, different page specifically for Kenwood:
> http://www.sarrio.com/sarrio/kenwoodmanuals.html
> 
>   This one is "iffy," but you can give it a try:
> http://www.myradioroom.com/manualsales.html
> 
>   I don't know of anyone who has successfully copied an *entire*
> TS-850S Service Manual and provided it freely. That's one helluva 
> job!
> 
>   73,
> 
>   Paul / N1FB