[Kenwood] Re: PSK with TS-570, but no audio out, STRANGE!

[Anders Janis SM4RNA]

Thanks fore sharing Gary.

Todyay we changed the PTT wire so now the radio switches over to TX and the 
mic is disabeled and ACC inpit is enabeled.

But now we encountered another problem. At first we "think" we saw full 
output, but when when we were about to adjust the sound level the we got 
very very low power. Probably less than 1W. We tried to max out the PC and 
the interface adjustments and also changed the Menu 33 back and forth, but 
still very weak signal.

Any ideas? Can one break somthing at the ACC conector with to high level?

de Anders SM4RNA and Conny SA4AGM




----- Original Message ----- 
From: "Gary Danaher" <gdanaher at comcast.net>
To: <sa4agm at ssa.se>; <Kenwood at mailman.qth.net>
Sent: Sunday, July 23, 2006 5:09 PM
Subject: [Kenwood] Re: PSK with TS-570, but no audio out


>I have an original 570D and had a similar problem. I discovered that menu 
>33, Level, was the problem. I had to turn the radio on, go to the menu33, 
>toggle it to another value, say from 2 to 1 and then back to 2, and then it 
>would output correctly and would do so as long as the radio was on, but as 
>soon as it was turned off, the next time it came on it would need to be 
>toggled in order to work. I have never found anyone else with this problem 
>and there is nothing else wrong with the radio. Hope this helps, and if 
>there is a wiring work around for this I'd love to know.
> Gary
> AB5RM
>
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Kenwood at mailman.qth.net