[Kenwood] PSK with TS-570, but no audio out.

[Anders Janis SM4RNA]

Thanks Alan.

You are right. pin 13 is used. So much for buying premade cables,,,.

de Anders SM4RNA


----- Original Message ----- 
From: "Alan Wolke" <w2aew at arrl.net>
To: "Anders Janis SM4RNA" <sm4rna at telia.com>
Cc: <Kenwood at mailman.qth.net>; <sa4agm at ssa.se>
Sent: Saturday, July 22, 2006 2:36 PM
Subject: Re: [Kenwood] PSK with TS-570, but no audio out.


> There are two keying lines on the 13-pin accy plug.  One for normal phone 
> PTT (called SS, pin-13), and the other for data PTT (called PKS, pin 9). 
> When SS is used to key the rig, then the MIC input is used for audio, and 
> the PKD (data) line is muted.  When the PKS line is used to key the rig, 
> then audio is taken from the PKD and the MIC is muted.  From your 
> description, it sounds like you are keying in phone-mode (either with SS 
> or the front panel mic connector PTT).  Try keying with PKS and it should 
> work.
>
> 73,
> Alan
>
>
> Anders Janis SM4RNA wrote:
>
>> Hi.
>>
>> Trying to help a friend to connect a interface to work PSK with a TS-570. 
>> He can recive PSK and the PTT switch work but no audio is transmitted. 
>> Have been trying to adjust menu  33 and 34. Have verified the interface 
>> and have also chcked the connection. I also noted that there are "three 
>> grounds" chassie + audio in and out.
>>
>> When trying to transmit I noted that the mic is picking up sound. On my 
>> IC-775 I press and hold the USB button until the display show USB DATA. 
>> Then the mic is  disabeled and the audio is picked upp at the back of the 
>> radio at the ACC connector.
>>
>> What to do?
>>
>> de Anders SM4RNA
>>
>> Conny detta är skickat till Kenwoodreflektorn, i fall de vet nåt bra 
>> tips.
>> ______________________________________________________________
>> Kenwood mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/kenwood
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Kenwood at mailman.qth.net
>>
>