[Kenwood] Kenwood sw-2100 give some swr !!??

[Allan]

Hi all, 

I use a kenwood ts-850sat, a TL-922 and a sw-2100.

The problem is that the kenwood sw-2100 ( swr and power meter ) give a swr
of 1.5 to my coaxial line. 

This is some tests I made :

1) The swr-meter is connecting directly to the antenna and go to the
amplifier.

I see the same swr on the swr meter's transceiver and the power's amplifier
is about 1kw pep instead of 2 kw pep ( see on rf meter's amplifier)

2) If I connect it between transceiver and amplifier, I see swr 1.1 on
sw-2100 and swr 1.5 on swr meter's transceiver and the power's amplifier is
2 kw pep.

3) If I switch off the sw-2100, swr is 1.1 on swr's meter transceiver and
power's amplifier is 2 kw pep.

Coaxial line for connecting all equipment together measure 1 meter ( 39.37
inches ).

Do you have some councils  to solve this problem? 

Many thanks

Regards

Allan


	

	
		
___________________________________________________________________________ 
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! 
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses 
http://fr.answers.yahoo.com