[Kenwood] Knwd filter question

[Dennis Doran]

Martin,

Thanks so much for your reply.  The reason for my
question, is that the YK filter induces insertion loss
on transmit in the 820 series, but no loss in the 830
series. I figured there had to be a difference.  I
appreciate your reply.  INRAD lists the same filter
for both the 820 and 830 series, but again, insertion
loss results in the 820.

73,
dennis
WB8WTU


--- Martin Sole <msole at loxinfo.co.th> wrote:

> Answer below
> 
> -----Original Message-----
> From: kenwood-bounces at mailman.qth.net
> [mailto:kenwood-bounces at mailman.qth.net] On Behalf
> Of Dennis Doran
> Sent: 20 June 2005 19:41
> To: kenwood at mailman.qth.net
> Subject: [Kenwood] Knwd filter question
> 
> Hello all,
> 
> Can anyone comment on the difference
> between the YG-88C and the YK-88C
> cw filters? The YG is used in the TS-820S series. 
> 
> Is the major difference just size, both are solder
> in, or is there some
> impedence difference as well ?
> 
> Thanks for sharing your experience. 
> 
> 73,
> dennis
> wb8wtu
> __________________________________
> 
> Hi Dennis
> 
> I think the difference is the center frequency. YK
> is 8.830MHz and YG is
> 8.800MHz. I have a YG-88C somewhere around here for
> sale if anybody needs
> one.
> 
> 73
> Martin, HS0ZED
> 
> 



		
____________________________________________________ 
Yahoo! Sports 
Rekindle the Rivalries. Sign up for Fantasy Football 
http://football.fantasysports.yahoo.com