[Kenwood] Programming software for Kenwood G707

[David M0WAM]

Greg,

Find the USB to Serial Adapter under Ports in Device Manager, double click
on it, click the Port Settings tab, and click the Advanced button - You can
select Com 1 there!  That should do it...

73

David
M0WAM


> -----Original Message-----
> From: kenwood-bounces at mailman.qth.net 
> [mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Greg Crawford
> Sent: 14 June 2005 22:19
> To: kenwood at mailman.qth.net
> Subject: [Kenwood] Programming software for Kenwood G707
> 
> 
> We are trying to setup the software for the G707 to work with 
> my new laptop, a Dell Inspiron, that only has USB ports (no 
> serial port).  I have a converter cable from serial to USB, 
> but when we plug it into the usb ports, it shows up as Com4, 
> Com5, Com6, or Com7..not Com 1 or Com 2.  Unfortunately the 
> software for the G707 will only work with Com 1 or Com 2..has 
> anyone run into this issue and successfully made the software 
> work??  If so, can you help me out??
> 
>  
> 
> Thanks for your help!
> 
>  
> 
> Greg Crawford
> 
> C F & H Insurance Agency, Inc.
> 
> 113 S. State St., PO Box 378
> 
> Monticello, Il. 61856
> 
> 217-762-2182
> 
> 217-762-7217 FAX
> 
> greg at cfhins.com
> 
>  
> 
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Kenwood at mailman.qth.net
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 14/06/2005