[Kenwood] SM-220/BS-8 with the TS-940S

[Garey Barrell]

Chris -

I have an Addendum sheet titled "TS-940/BS-8 Alignment Procedure Notes" 
that clarifies the setup alignment.  Essentially the interconnection 
examples shown in the SM-220 manual for the TS-830 work with the TS-940.

73, Garey - K4OAH
Atlanta

Drake C-Line Service Manual
<http://hr99.home.mindspring.com/R-4C_Servicez/>



zap at columbus.rr.com wrote:

>Agreed!  I would be interested in hearing about using the SM-220 in conjunction with my TS-940.  I tried adjusting the pan adapter a while back, but couldn't get it calibrated properly, so any advice or help would be appreciated!  For that matter, I would appreciate suggestions for replicating the other connections that can be used with the scope, as it came with no cables.
>
>-73-
>Chris, N9WIV
>
>----- Original Message -----
>From: peter markavage <manualman at juno.com>
>Date: Tuesday, February 1, 2005 3:15 pm
>Subject: Re: [Kenwood] SM-220/BS-8 with the TS-940S
>
>  
>
>>Page 6 (it's a fold-out) of the 940 operating manual gives the 
>>info on
>>the rear panel connections including the SM-220. 
>>
>>This is good stuff to talk about. Why take it off-line? A lot of 
>>othersmight get some good info. Let's not keep it a secret.
>>
>>Pete, wa2cwa
>>
>>On Tue, 01 Feb 2005 03:41:28 +0000 rsakabu at comcast.net writes:
>>    
>>
>>>Joe,
>>>
>>>The SM-220/BS-8 works great with the 940.  Just make sure you 
>>>      
>>>
>>plug 
>>    
>>
>>>cable from the IF input on the back of the BS-8 into the 940's 
>>>      
>>>
>>IF-1 
>>    
>>
>>>jack, not the IF-2 jack which is for RX modulation monitoring.  
>>>      
>>>
>>If 
>>    
>>
>>>you have any more questions about settings, email me and we'll 
>>>      
>>>
>>take 
>>    
>>
>>>this discussion off line.  The SM-220/BS-8 is a great way to 
>>>visually check band activity.
>>>
>>>73
>>>Roy
>>>AD6ZU
>>>
>>>--------------------------------------
>>>
>>>
>>>Hi all,
>>>
>>>    Here I am with another dumb question.  I finally decided to 
>>>hook
>>>up my SM-220 w/BS-8 to my TS-940S/AT that is now running like
>>>new ever since the going over by John down in FL.  Well, I got 
>>>the manual [both operating and service] manuals out and I cannot
>>>find where it even mentions the 940.  I cannot believe that it 
>>>cannot
>>>be used with the 940 - am I wrong?  If anyone has the time, let me
>>>know where I can find information re: hook-up procedures for
>>>the 220 to the 940.
>>>TIA
>>>73,
>>>Joe W7LPF
>>>      
>>>