[Kenwood] SM-220/BS-8 with the TS-940S

[peter markavage]

Page 6 (it's a fold-out) of the 940 operating manual gives the info on
the rear panel connections including the SM-220. 

This is good stuff to talk about. Why take it off-line? A lot of others
might get some good info. Let's not keep it a secret.

Pete, wa2cwa

On Tue, 01 Feb 2005 03:41:28 +0000 rsakabu at comcast.net writes:
> Joe,
> 
> The SM-220/BS-8 works great with the 940.  Just make sure you plug 
> cable from the IF input on the back of the BS-8 into the 940's IF-1 
> jack, not the IF-2 jack which is for RX modulation monitoring.  If 
> you have any more questions about settings, email me and we'll take 
> this discussion off line.  The SM-220/BS-8 is a great way to 
> visually check band activity.
> 
> 73
> Roy
> AD6ZU
> 
> --------------------------------------
> 
> 
> Hi all,
> 
>     Here I am with another dumb question.  I finally decided to 
> hook
> up my SM-220 w/BS-8 to my TS-940S/AT that is now running like
> new ever since the going over by John down in FL.  Well, I got 
> the manual [both operating and service] manuals out and I cannot
> find where it even mentions the 940.  I cannot believe that it 
> cannot
> be used with the 940 - am I wrong?  If anyone has the time, let me
> know where I can find information re: hook-up procedures for
> the 220 to the 940.
> TIA
> 73,
> Joe W7LPF