[Kenwood] TS940 Clock failure

[Clif Holland]

Have you reset the clock?? (The small black pushbutton below the battery)

If so then check the onboard voltage regulator, the solder on the legs tends 
to break. It's in the bottom left corner.

Clif Holland, KA5IPF
www.avvid.com


----- Original Message ----- 
From: "jim best" <james9194 at bresnan.net>
To: <kenwood at mailman.qth.net>
Sent: Wednesday, October 13, 2004 11:20 PM
Subject: [Kenwood] TS940 Clock failure


>            I recently purchased a Kenwood TS940S.  I have most of the
> bugs
>            worked out except for one.  The Clock/Graph is blank and not
> lit.
>            When I turn the contrast control fully clockwise I see
> several black
>            squares across the display area.  Has anyone seen this
> problem?
>            I checked the battery mounted on the back of the clock and
> that
>            is good.
>
>            As always help is appreciated.
>
>            Thanks,
>            Jim  WU7G
>
>
> _______________________________________________
> Kenwood mailing list
> Kenwood at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/subscribers.htm
>