SV: [Kenwood] ts-440
GGLL
[email protected]
Tue, 09 Mar 2004 23:05:35 -0300
Hello Rolf, yes, there's a mod related, after which you can use the
car control as an RF power level control; although I have not done it in
mine's, I read that it makes more trouble than benefit.
Best regards
Guillermo - LU8EYW.
rolf heidenborg escribi�:
>Hi,
>I think you find a mod to set RF-power-output in SSB mode with
>the CAR-control
>knob without touching micgainsetting at the danish site.
>73
>Rolf sm0cls
>
>-----Ursprungligt meddelande-----
>Fr�n: [email protected]
>[mailto:[email protected]] F�r GGLL
>Skickat: den 10 mars 2004 00:13
>Till: Kenwood
>�mne: Re: [Kenwood] ts-440
>
> Hello Gerald, there are many ways; I do not work psk (it
>works into the mic audio chain, isn't it?), so one way could be
>turning mic gain down to desired level. Another, permanent way
>for ALL modes, is to trim the internal power output setting VR,
>and by last there's an internal jumper or switch to set power
>output to 50 watts maximum, also for ALL modes (this I think
>intended to the Japan sell models).
> Both are under the Filter unit cover on the bottom of the rig.
>
>Good luck
>Guillermo - LU8EYW.
>
>gerald bishop escribi�:
>
>
>
>>Hi- Trying to help a friend out. How do you turn the power
>>
>>
>out-put down
>
>
>>on a TS-440?? Want to cut it in half for PSK. Only referance is
>>
>>
>for
>
>
>>setting up a linear- says to cut it down half-way. No mention as
>>
>>
>to
>
>
>>where-what. TKS,Jerry
>>
>>--- StripMime Report -- processed MIME parts ---
>>
>>
>multipart/alternative
>
>
>> text/plain (text body -- kept)
>> text/html
>>The reason this message is shown is because the post was in HTML
>>
>>
>or had
>
>
>>an attachment. Attachments are not allowed. To learn how to
>>
>>
>post in
>
>
>>Plain-Text go to: http://www.expita.com/nomime.html ---
>>- - -
>>
>>Your moderator for this list is:
>>Larry Wilson KE1HZ [email protected]
>>
>>_______________________________________________
>>Kenwood mailing list
>>[email protected]
>>http://mailman.qth.net/mailman/listinfo/kenwood
>>
>>
>>
>>
>>
>>
>- - -
>
>Your moderator for this list is:
>Larry Wilson KE1HZ [email protected]
>
>_______________________________________________
>Kenwood mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/kenwood
>
>
>
>
>