[Kenwood] ts-440

[GGLL]

    Hello Gerald, there are many ways; I do not work psk (it works into 
the mic audio chain, isn't it?), so one way could be turning mic gain 
down to desired level. Another, permanent way for ALL modes, is to trim  
the internal power output setting VR, and by last there's an internal 
jumper or switch to set power output to 50 watts maximum, also for ALL 
modes (this I think intended to the Japan sell models).
 Both are under the Filter unit cover on the bottom of the rig.

Good luck
Guillermo - LU8EYW.

gerald bishop escribi�:

>Hi- Trying to help a friend out. How do you turn the power out-put down on a TS-440?? Want to cut it in half for PSK. Only referance is for setting up a linear- says to cut it down half-way. No mention as to where-what. TKS,Jerry
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>  text/plain (text body -- kept)
>  text/html
>The reason this message is shown is because the post was in HTML
>or had an attachment.  Attachments are not allowed.  To learn how
>to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>- - -
>
>Your moderator for this list is:
>Larry Wilson KE1HZ kenwood-owner@mailman.qth.net
>
>_______________________________________________
>Kenwood mailing list
>Kenwood@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/kenwood
>
>
>  
>