[Kenwood] Caig Products

Fri, 2 Jan 2004 15:55:49 -0600

Anyone heard about shelf-life issues with Deoxit?  I asked the Deoxit guy at
Dayton last year, and he didn't know.

Deoxit is the best stuff I have ever used.  It can take a rusty TR-3 that
has sat in a garage for 35 years and make it sound like new.
73,
Mark
N5KAE

----- Original Message -----
From: "Larry, K4WLS" <[email protected]>
To: "[Kenwood]" <[email protected]>
Sent: Friday, January 02, 2004 3:32 PM
Subject: [Kenwood] Caig Products

> Read the Information Brochure (that contains all products) that
> came with your product, or read the Technical Q/A, or Tech
> Info at www.caig.www    Also can order on-line
>
> DetoxIT D5:   A deoxidizing solution only primarily designed for
>                       heavily oxidized and dirty switches and connectors.
>                       This solution is flammable, and contains no drying
>                       or lubricating chemicals. This solution can
>                       permeate pourous insulating materials such as
>                       phenolic and make them conductive when used in
>                       in excess. When used, apply sparingly in 2, 3, or
>                       or more treatments, rotate switch back and forth
>                       through positions. Remove all excess with a lint
>                       free cloth or lint free swab (not Q-Tip). Available
>                       in spray, bottle with brush-on applicator, or
squeeze
>                       tube. This solution can also damage certain older
>                       plastic insulating materials. Do a test spot if not
> sure.
>
> DetoxIT Dn5: Available in 100 % or 10 % solutions. This cleaner
>                       is non-flammable and safe for use on plastics and
>                       other insulating materials. The 100 % solution
>                       contains a drying agent, but no lubricant. The 10 %
>                       solution contains a drying agent, and a mineral oil
>                       based lubricant. This is your best all-round
cleaning
>                       and lubricant agent for switches (the 10 %).
>
> ProGold:        For use on switches in new equipment only.
>                       Contains a lubricant and cleaning solution that
>                       ionically bonds with the plated material of new
>                       (non-oxidized or not dirty) switches.
>
> CailLube MCL:  The best cleaner and lubricant for carbon
>                          composition potentiometers and and audio fader
>                          controls. Will not damage plastic or other
>                          insulating materials in the control.
>
> For heavily oxidized and dirty switches try one or more treatments
> of D5. Remove all excess solution with lint free cloth or swab. Let
> stand overnight, and use an application of 10 % Dn5 as a finishing
> touch. The 10 % Dn5 will provide the lubricant your switch needs.
>
> If you can obtain a new or used hypodermic syringe (a shot
> needle), this is the best device in the world to give your switches
> and pots a shot of Caig cleaners. It gets in the tight slits of pots,
> and allows you to put the cleaner at the right place, and in the
> right amount on switches. It also prevents a mess due to over-
> spray.
>
> NEVER use a pencil eraser or burnishing tool to clean switch
> contacts. The abrasive action of these will remove the plating
> material on the switch, and will create bigger problems in future.
>
> NEVER use WD-40 (a water displacement lubricant for mechanical metal
parts)
> on electronic controls.
>
> Hope this helps,   Larry   K4WLS
>
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood