[Kenwood] TS-820S

[n. Callaghan]

What would the BLUE Loctite do??  It never hardens completely
so you could get it apart again if need be. See your friendly auto
parts supplier.
73, N2AVN, Norm

Dave Edwards wrote:

>Perhaps specific to some production runs??
>My 820S and 520S have never been opened up...Except to install CW filters
>when new.
>No problem with loose shafts.
>...Dave
>----- Original Message ----- 
>From: "Bill Kuhn" <bkuhn at kuhngroup.com>
>To: <kenwood at mailman.qth.net>
>Sent: Saturday, August 28, 2004 11:25 AM
>Subject: RE: [Kenwood] TS-820S
>
>
>
>On the subject of these lousy shaft couplers, does anyone have any
>suggestions on how to ensure they stay tight on the shafts?
>
>I have to open up my TS-530S at least every couple of months to tighten
>the screws on the coupler or it will loosen up enough to go completely
>out of whack (that's a pain to try to find proper alignment again).
>
>I'm afraid to crank down too hard on the screws - I don't want to strip
>them. Is there anything like Loktite that would work on the coupler?
>
>And Joe - if you find a place that sells the couplers, let me know
>please. I might as well buy a few for future use.
>
>_______________________________________________
>
>Bill Kuhn
>KC0NYL
>
>My recent contacts are here..
>http://www.kuhngroup.com/hamcontacts_interface/contacts/results_page.asp
>_______________________________________________
>
>
>-----Original Message-----
>From: kenwood-bounces at mailman.qth.net
>[mailto:kenwood-bounces at mailman.qth.net] On Behalf Of Clif Holland
>Sent: Saturday, August 28, 2004 9:15 AM
>To: joe sloss; kenwood at mailman.qth.net
>Subject: Re: [Kenwood] TS-820S
>
>D22-0409-05
>
>Clif Holland, KA5IPF
>www.avvid.com
>
>
>----- Original Message ----- 
>From: "joe sloss" <k7mks at comcast.net>
>To: <kenwood at mailman.qth.net>
>Sent: Saturday, August 28, 2004 2:01 AM
>Subject: [Kenwood] TS-820S
>
>
>Can anyone give me the Kenwood part number for the small nylon shaft
>coupling that connects the main bandswitch shaft to the final tank
>circuit
>bandswitch shaft.  Thanks Joe k7mks
>_______________________________________________
>Kenwood mailing list
>Kenwood at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/kenwood
>Help: http://mailman.qth.net/subscribers.htm
>
>
>_______________________________________________
>Kenwood mailing list
>Kenwood at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/kenwood
>Help: http://mailman.qth.net/subscribers.htm
>
>
>_______________________________________________
>Kenwood mailing list
>Kenwood at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/kenwood
>Help: http://mailman.qth.net/subscribers.htm
>
>_______________________________________________
>Kenwood mailing list
>Kenwood at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/kenwood
>Help: http://mailman.qth.net/subscribers.htm
>
>
>  
>