[Kenwood] Inrad Filter Info Please

Tue, 22 Jul 2003 13:00:55 -0400

Tim,

I had this same concern when I installed the #95 from Inrad in my=20
TS-950.  I have the service manual for the radio which includes all of the=
=20
pcb layouts so I verified that the pins that Inrad has you cut off are=20
simply 'redundant' grounds and should present no problem if you ever=20
install kenwood filters.

73 de W2RDS
Rick

At 11:46 AM 7/22/03 -0500, Tim Randa wrote:
>I've just acquired a #95 1.8 ssb filter made by Inrad for my TS-570DG.
>The instructions say to clip off two of the 5 pins on one side stating
>they are ground pins and are not needed even for the "kenwood filter"
>(singular). My question is if this will effect ether the cw or ssb
>kenwood filters if they are reinstalled instead of the inrad?
>
>73 de Tim  K=D8FL
>
>--
>France has neither winter, nor summer, nor morals.
>France is miserable because it is filled with
>Frenchmen, and Frenchmen are miserable
>because they live in France. - Mark Twain
>
>
>
>- - -
>
>Your moderator for this list is:
>Larry Wilson KE1HZ [email protected]
>
>_______________________________________________
>Kenwood mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/kenwood